|
virtual const char * | GetClassName () |
|
virtual int | IsA (const char *type) |
|
virtual void | SetDistanceType (const std::string &) |
|
virtual std::string | GetDistanceType () |
|
virtual void | SetDistanceFieldName (const std::string &) |
|
virtual std::string | GetDistanceFieldName () |
|
virtual double | Getresult () |
|
void | UpdateThreadNumber () |
|
void | SetThreadNumber (int threadNumber) |
|
void | SetUseAllCores (bool useAllCores) |
|
void | SetDebugLevel (int debugLevel) |
|
void | SetCompactTriangulationCacheSize (float cacheSize) |
|
vtkDataArray * | GetOptionalArray (const bool &enforceArrayIndex, const int &arrayIndex, const std::string &arrayName, vtkDataSet *const inputData, const int &inputPort=0) |
|
vtkDataArray * | GetOrderArray (vtkDataSet *const inputData, const int scalarArrayIdx, ttk::Triangulation *triangulation, const bool getGlobalOrder=false, const int orderArrayIdx=0, const bool enforceOrderArrayIdx=false) |
|
vtkDataArray * | checkForGlobalAndComputeOrderArray (vtkDataSet *const inputData, vtkDataArray *scalarArray, const int scalarArrayIdx, const bool getGlobalOrder, vtkDataArray *orderArray, ttk::Triangulation *triangulation, const bool enforceOrderArrayIdx) |
|
vtkDataArray * | ComputeOrderArray (vtkDataSet *const inputData, vtkDataArray *scalarArray, const int scalarArrayIdx, const bool getGlobalOrder, vtkDataArray *oldOrderArray, ttk::Triangulation *triangulation) |
|
ttk::SimplexId * | GetIdentifierArrayPtr (const bool &enforceArrayIndex, const int &arrayIndex, const std::string &arrayName, vtkDataSet *const inputData, std::vector< ttk::SimplexId > &spareStorage, const int inputPort=0, const bool printErr=true) |
|
ttk::Triangulation * | GetTriangulation (vtkDataSet *dataSet) |
|
int | ProcessRequest (vtkInformation *request, vtkInformationVector **inputVectors, vtkInformationVector *outputVector) override |
|
vtkDataSet * | GetOutput () |
|
vtkDataSet * | GetOutput (int) |
|
void | SetInputData (vtkDataSet *) |
|
void | SetInputData (int, vtkDataSet *) |
|
void | AddInputData (vtkDataSet *) |
|
void | AddInputData (int, vtkDataSet *) |
|
template<typename inputType > |
int | checkEmptyMPIInput (inputType *input) |
| This method tests whether the input is a nullptr. If the computation is being done on multiple processes, it is possible that the domain of one process or more is empty, but not others, therefore in that particular case the rest of the filter will not be computed but an error message will not be sent.
|
|
| Debug () |
|
| ~Debug () override |
|
virtual int | setDebugLevel (const int &debugLevel) |
|
int | setWrapper (const Wrapper *wrapper) override |
|
int | printMsg (const std::string &msg, const debug::Priority &priority=debug::Priority::INFO, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::vector< std::string > &msgs, const debug::Priority &priority=debug::Priority::INFO, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printErr (const std::string &msg, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cerr) const |
|
int | printWrn (const std::string &msg, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cerr) const |
|
int | printMsg (const std::string &msg, const double &progress, const double &time, const int &threads, const double &memory, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const double &time, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const double &time, const int &threads, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const debug::Priority &priority, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::vector< std::vector< std::string > > &rows, const debug::Priority &priority=debug::Priority::INFO, const bool hasHeader=true, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const debug::Separator &separator, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::INFO, std::ostream &stream=std::cout) const |
|
int | printMsg (const debug::Separator &separator, const debug::Priority &priority, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const debug::Separator &separator, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::INFO, std::ostream &stream=std::cout) const |
|
void | setDebugMsgPrefix (const std::string &prefix) |
|
| BaseClass () |
|
virtual | ~BaseClass ()=default |
|
int | getThreadNumber () const |
|
virtual int | setThreadNumber (const int threadNumber) |
|
|
| ttkLDistance () |
|
int | FillInputPortInformation (int port, vtkInformation *info) override |
|
int | FillOutputPortInformation (int port, vtkInformation *info) override |
|
int | RequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) override |
|
| ttkAlgorithm () |
|
| ~ttkAlgorithm () override |
|
void | MPIGhostPipelinePreconditioning (vtkDataSet *input) |
|
void | MPIPipelinePreconditioning (vtkDataSet *input, std::vector< int > &neighbors, std::map< int, int > &neighToId, ttk::Triangulation *triangulation=nullptr) |
|
bool | checkGlobalIdValidity (ttk::LongSimplexId *globalIds, ttk::SimplexId simplexNumber, unsigned char *ghost, int *rankArray) |
|
int | GenerateGlobalIds (vtkDataSet *input, std::unordered_map< ttk::SimplexId, ttk::SimplexId > &vertGtoL, std::vector< int > &neighborRanks, std::map< int, int > &neighborsToId) |
|
void | MPITriangulationPreconditioning (ttk::Triangulation *triangulation, vtkDataSet *input) |
|
virtual int | RequestDataObject (vtkInformation *request, vtkInformationVector **inputVectors, vtkInformationVector *outputVector) |
|
virtual int | RequestInformation (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestUpdateTime (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestUpdateTimeDependentInformation (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestUpdateExtent (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestDataNotGenerated (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestData (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
int | FillInputPortInformation (int ttkNotUsed(port), vtkInformation *ttkNotUsed(info)) override |
|
int | FillOutputPortInformation (int ttkNotUsed(port), vtkInformation *ttkNotUsed(info)) override |
|
int | printMsgInternal (const std::string &msg, const std::string &right, const std::string &filler, const debug::Priority &priority=debug::Priority::INFO, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsgInternal (const std::string &msg, const debug::Priority &priority, const debug::LineMode &lineMode, std::ostream &stream=std::cout) const |
|
int | welcomeMsg (std::ostream &stream) |
|
| LDistance () |
|
template<class dataType > |
int | execute (const dataType *const inputData1, const dataType *const inputData2, dataType *const outputData, const std::string &distanceType, const SimplexId vertexNumber) |
|
template<class dataType , typename PowerFunc > |
int | computeLn (const dataType *const input1, const dataType *const input2, dataType *const output, const int n, const SimplexId vertexNumber, const PowerFunc &powerFunc) |
|
template<class dataType > |
int | computeLinf (const dataType *const input1, const dataType *const input2, dataType *const output, const SimplexId vertexNumber) |
|
double | getResult () |
|
void | setPrintRes (const bool data) |
|
TTK VTK-filter that wraps the lDistance processing package.
- Author
- Maxime Soler soler.nosp@m..max.nosp@m.ime@t.nosp@m.otal.nosp@m..com
- Date
- 26/02/2017
VTK wrapping code for the ttk::LDistance package.
- Parameters
-
Input | Input scalar field (vtkDataSet) |
Output | Output scalar field (vtkDataSet) |
The input data array needs to be specified via the standard VTK call vtkAlgorithm::SetInputArrayToProcess() with the following parameters:
- Parameters
-
idx | 0 (FIXED: the first array the algorithm requires) |
idx | 1 (FIXED: the second array the algorithm requires) |
port | 0 (FIXED: first port) |
connection | 0 (FIXED: first connection) |
fieldAssociation | 0 (FIXED: point data) |
arrayName | (DYNAMIC: string identifier of the input array) |
This filter can be used as any other VTK filter (for instance, by using the sequence of calls SetInputData(), Update(), GetOutput()).
See the corresponding ParaView state file example for a usage example within a VTK pipeline.
- See also
- ttk::LDistance
Definition at line 38 of file ttkLDistance.h.