|
virtual const char * | GetClassName () |
|
virtual int | IsA (const char *type) |
|
void | UpdateThreadNumber () |
|
void | SetThreadNumber (int threadNumber) |
|
void | SetUseAllCores (bool useAllCores) |
|
void | SetDebugLevel (int debugLevel) |
|
void | SetCompactTriangulationCacheSize (float cacheSize) |
|
vtkDataArray * | GetOptionalArray (const bool &enforceArrayIndex, const int &arrayIndex, const std::string &arrayName, vtkDataSet *const inputData, const int &inputPort=0) |
|
vtkDataArray * | GetOrderArray (vtkDataSet *const inputData, const int scalarArrayIdx, ttk::Triangulation *triangulation, const bool getGlobalOrder=false, const int orderArrayIdx=0, const bool enforceOrderArrayIdx=false) |
|
vtkDataArray * | checkForGlobalAndComputeOrderArray (vtkDataSet *const inputData, vtkDataArray *scalarArray, const int scalarArrayIdx, const bool getGlobalOrder, vtkDataArray *orderArray, ttk::Triangulation *triangulation, const bool enforceOrderArrayIdx) |
|
vtkDataArray * | ComputeOrderArray (vtkDataSet *const inputData, vtkDataArray *scalarArray, const int scalarArrayIdx, const bool getGlobalOrder, vtkDataArray *oldOrderArray, ttk::Triangulation *triangulation) |
|
ttk::SimplexId * | GetIdentifierArrayPtr (const bool &enforceArrayIndex, const int &arrayIndex, const std::string &arrayName, vtkDataSet *const inputData, std::vector< ttk::SimplexId > &spareStorage, const int inputPort=0, const bool printErr=true) |
|
ttk::Triangulation * | GetTriangulation (vtkDataSet *dataSet) |
|
int | ProcessRequest (vtkInformation *request, vtkInformationVector **inputVectors, vtkInformationVector *outputVector) override |
|
vtkDataSet * | GetOutput () |
|
vtkDataSet * | GetOutput (int) |
|
void | SetInputData (vtkDataSet *) |
|
void | SetInputData (int, vtkDataSet *) |
|
void | AddInputData (vtkDataSet *) |
|
void | AddInputData (int, vtkDataSet *) |
|
template<typename inputType > |
int | checkEmptyMPIInput (inputType *input) |
| This method tests whether the input is a nullptr. If the computation is being done on multiple processes, it is possible that the domain of one process or more is empty, but not others, therefore in that particular case the rest of the filter will not be computed but an error message will not be sent.
|
|
| Debug () |
|
| ~Debug () override |
|
virtual int | setDebugLevel (const int &debugLevel) |
|
int | setWrapper (const Wrapper *wrapper) override |
|
int | printMsg (const std::string &msg, const debug::Priority &priority=debug::Priority::INFO, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::vector< std::string > &msgs, const debug::Priority &priority=debug::Priority::INFO, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printErr (const std::string &msg, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cerr) const |
|
int | printWrn (const std::string &msg, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cerr) const |
|
int | printMsg (const std::string &msg, const double &progress, const double &time, const int &threads, const double &memory, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const double &time, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const double &time, const int &threads, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const debug::Priority &priority, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::vector< std::vector< std::string > > &rows, const debug::Priority &priority=debug::Priority::INFO, const bool hasHeader=true, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const debug::Separator &separator, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::INFO, std::ostream &stream=std::cout) const |
|
int | printMsg (const debug::Separator &separator, const debug::Priority &priority, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const debug::Separator &separator, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::INFO, std::ostream &stream=std::cout) const |
|
void | setDebugMsgPrefix (const std::string &prefix) |
|
| BaseClass () |
|
virtual | ~BaseClass ()=default |
|
int | getThreadNumber () const |
|
virtual int | setThreadNumber (const int threadNumber) |
|
|
| ttkClusteringMetrics () |
|
| ~ttkClusteringMetrics () override=default |
|
int | FillInputPortInformation (int port, vtkInformation *info) override |
|
int | FillOutputPortInformation (int port, vtkInformation *info) override |
|
int | RequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) override |
|
| ttkAlgorithm () |
|
| ~ttkAlgorithm () override |
|
void | MPIGhostPipelinePreconditioning (vtkDataSet *input) |
|
void | MPIPipelinePreconditioning (vtkDataSet *input, std::vector< int > &neighbors, std::map< int, int > &neighToId, ttk::Triangulation *triangulation=nullptr) |
|
bool | checkGlobalIdValidity (ttk::LongSimplexId *globalIds, ttk::SimplexId simplexNumber, unsigned char *ghost, int *rankArray) |
|
int | GenerateGlobalIds (vtkDataSet *input, std::unordered_map< ttk::SimplexId, ttk::SimplexId > &vertGtoL, std::vector< int > &neighborRanks, std::map< int, int > &neighborsToId) |
|
void | MPITriangulationPreconditioning (ttk::Triangulation *triangulation, vtkDataSet *input) |
|
virtual int | RequestDataObject (vtkInformation *request, vtkInformationVector **inputVectors, vtkInformationVector *outputVector) |
|
virtual int | RequestInformation (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestUpdateTime (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestUpdateTimeDependentInformation (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestUpdateExtent (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestDataNotGenerated (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestData (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
int | FillInputPortInformation (int ttkNotUsed(port), vtkInformation *ttkNotUsed(info)) override |
|
int | FillOutputPortInformation (int ttkNotUsed(port), vtkInformation *ttkNotUsed(info)) override |
|
int | printMsgInternal (const std::string &msg, const std::string &right, const std::string &filler, const debug::Priority &priority=debug::Priority::INFO, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsgInternal (const std::string &msg, const debug::Priority &priority, const debug::LineMode &lineMode, std::ostream &stream=std::cout) const |
|
int | welcomeMsg (std::ostream &stream) |
|
| ClusteringMetrics () |
|
int | execute (const int *clustering1, const int *clustering2, const size_t n, double &nmiValue, double &ariValue) const |
|
int | computeContingencyTables (const int *clust1, const int *clust2, const size_t nPoint, std::vector< std::vector< int > > &contingencyMatrix, std::vector< int > &sumLin, std::vector< int > &sumCol) const |
|
int | computeARI (const std::vector< std::vector< int > > &contingencyMatrix, const std::vector< int > &sumLin, const std::vector< int > &sumCol, const size_t nPoint, double &ariValue) const |
|
int | computeNMI (const std::vector< std::vector< int > > &contingencyMatrix, const std::vector< int > &sumLin, const std::vector< int > &sumCol, const size_t nPoint, double &nmiValue) const |
|
TTK VTK-filter that wraps the ttk::ClusteringMetrics module.
- Author
- Alexandre Talon alexa.nosp@m.ndre.nosp@m..talo.nosp@m.n@li.nosp@m.p6.fr
- Date
- January 2022.
This VTK filter uses the ttk::ClusteringMetrics module to compute two scores (NMI and ARI) to compare two clusterings of the same points.
- Parameters
-
Input0 | vtkTable. |
Input1 | vtkTable. |
Output | vtkTable. |
This filter can be used as any other VTK filter (for instance, by using the sequence of calls SetInputData(), Update(), GetOutputDataObject()).
The input data array needs to be specified via the standard VTK call vtkAlgorithm::SetInputArrayToProcess() with the following parameters:
- Parameters
-
idx | 0 (FIXED: the first array the algorithm requires) |
port | 0 (FIXED: first port) |
connection | 0 (FIXED: first connection) |
fieldAssociation | 0 (FIXED: point data) |
arrayName | (DYNAMIC: string identifier of the input array) |
See the related ParaView example state files for usage examples within a VTK pipeline.
- See also
- ttk::ClusteringMetrics
-
ttkAlgorithm
Definition at line 43 of file ttkClusteringMetrics.h.