TTK VTK-filter that computes a new scalar array based on a sorting of the input array.
More...
|
virtual const char * | GetClassName () |
|
virtual int | IsA (const char *type) |
|
virtual void | SetIncreasingOrder (bool) |
|
virtual bool | GetIncreasingOrder () |
|
virtual void | SetStartByOne (bool) |
|
virtual bool | GetStartByOne () |
|
template<typename VTK_TT > |
int | dispatch (std::vector< ttk::SimplexId > &inputIds) |
|
void | UpdateThreadNumber () |
|
void | SetThreadNumber (int threadNumber) |
|
void | SetUseAllCores (bool useAllCores) |
|
void | SetDebugLevel (int debugLevel) |
|
void | SetCompactTriangulationCacheSize (float cacheSize) |
|
vtkDataArray * | GetOptionalArray (const bool &enforceArrayIndex, const int &arrayIndex, const std::string &arrayName, vtkDataSet *const inputData, const int &inputPort=0) |
|
vtkDataArray * | GetOrderArray (vtkDataSet *const inputData, const int scalarArrayIdx, ttk::Triangulation *triangulation, const bool getGlobalOrder=false, const int orderArrayIdx=0, const bool enforceOrderArrayIdx=false) |
|
vtkDataArray * | checkForGlobalAndComputeOrderArray (vtkDataSet *const inputData, vtkDataArray *scalarArray, const int scalarArrayIdx, const bool getGlobalOrder, vtkDataArray *orderArray, ttk::Triangulation *triangulation, const bool enforceOrderArrayIdx) |
|
vtkDataArray * | ComputeOrderArray (vtkDataSet *const inputData, vtkDataArray *scalarArray, const int scalarArrayIdx, const bool getGlobalOrder, vtkDataArray *oldOrderArray, ttk::Triangulation *triangulation) |
|
ttk::SimplexId * | GetIdentifierArrayPtr (const bool &enforceArrayIndex, const int &arrayIndex, const std::string &arrayName, vtkDataSet *const inputData, std::vector< ttk::SimplexId > &spareStorage, const int inputPort=0, const bool printErr=true) |
|
ttk::Triangulation * | GetTriangulation (vtkDataSet *dataSet) |
|
int | ProcessRequest (vtkInformation *request, vtkInformationVector **inputVectors, vtkInformationVector *outputVector) override |
|
vtkDataSet * | GetOutput () |
|
vtkDataSet * | GetOutput (int) |
|
void | SetInputData (vtkDataSet *) |
|
void | SetInputData (int, vtkDataSet *) |
|
void | AddInputData (vtkDataSet *) |
|
void | AddInputData (int, vtkDataSet *) |
|
template<typename inputType > |
int | checkEmptyMPIInput (inputType *input) |
| This method tests whether the input is a nullptr. If the computation is being done on multiple processes, it is possible that the domain of one process or more is empty, but not others, therefore in that particular case the rest of the filter will not be computed but an error message will not be sent.
|
|
| Debug () |
|
| ~Debug () override |
|
virtual int | setDebugLevel (const int &debugLevel) |
|
int | setWrapper (const Wrapper *wrapper) override |
|
int | printMsg (const std::string &msg, const debug::Priority &priority=debug::Priority::INFO, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::vector< std::string > &msgs, const debug::Priority &priority=debug::Priority::INFO, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printErr (const std::string &msg, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cerr) const |
|
int | printWrn (const std::string &msg, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cerr) const |
|
int | printMsg (const std::string &msg, const double &progress, const double &time, const int &threads, const double &memory, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const double &time, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const double &time, const int &threads, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::PERFORMANCE, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const double &progress, const debug::Priority &priority, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::vector< std::vector< std::string > > &rows, const debug::Priority &priority=debug::Priority::INFO, const bool hasHeader=true, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const debug::Separator &separator, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::INFO, std::ostream &stream=std::cout) const |
|
int | printMsg (const debug::Separator &separator, const debug::Priority &priority, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsg (const std::string &msg, const debug::Separator &separator, const debug::LineMode &lineMode=debug::LineMode::NEW, const debug::Priority &priority=debug::Priority::INFO, std::ostream &stream=std::cout) const |
|
void | setDebugMsgPrefix (const std::string &prefix) |
|
| BaseClass () |
|
virtual | ~BaseClass ()=default |
|
int | getThreadNumber () const |
|
virtual int | setThreadNumber (const int threadNumber) |
|
|
| ttkIdentifyByScalarField () |
|
| ~ttkIdentifyByScalarField () override=default |
|
int | FillInputPortInformation (int port, vtkInformation *info) override |
|
int | FillOutputPortInformation (int port, vtkInformation *info) override |
|
int | RequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) override |
|
| ttkAlgorithm () |
|
| ~ttkAlgorithm () override |
|
void | MPIGhostPipelinePreconditioning (vtkDataSet *input) |
|
void | MPIPipelinePreconditioning (vtkDataSet *input, std::vector< int > &neighbors, std::map< int, int > &neighToId, ttk::Triangulation *triangulation=nullptr) |
|
bool | checkGlobalIdValidity (ttk::LongSimplexId *globalIds, ttk::SimplexId simplexNumber, unsigned char *ghost, int *rankArray) |
|
int | GenerateGlobalIds (vtkDataSet *input, std::unordered_map< ttk::SimplexId, ttk::SimplexId > &vertGtoL, std::vector< int > &neighborRanks, std::map< int, int > &neighborsToId) |
|
void | MPITriangulationPreconditioning (ttk::Triangulation *triangulation, vtkDataSet *input) |
|
virtual int | RequestDataObject (vtkInformation *request, vtkInformationVector **inputVectors, vtkInformationVector *outputVector) |
|
virtual int | RequestInformation (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestUpdateTime (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestUpdateTimeDependentInformation (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestUpdateExtent (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestDataNotGenerated (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
virtual int | RequestData (vtkInformation *ttkNotUsed(request), vtkInformationVector **ttkNotUsed(inputVectors), vtkInformationVector *ttkNotUsed(outputVector)) |
|
int | FillInputPortInformation (int ttkNotUsed(port), vtkInformation *ttkNotUsed(info)) override |
|
int | FillOutputPortInformation (int ttkNotUsed(port), vtkInformation *ttkNotUsed(info)) override |
|
int | printMsgInternal (const std::string &msg, const std::string &right, const std::string &filler, const debug::Priority &priority=debug::Priority::INFO, const debug::LineMode &lineMode=debug::LineMode::NEW, std::ostream &stream=std::cout) const |
|
int | printMsgInternal (const std::string &msg, const debug::Priority &priority, const debug::LineMode &lineMode, std::ostream &stream=std::cout) const |
|
int | welcomeMsg (std::ostream &stream) |
|
TTK VTK-filter that computes a new scalar array based on a sorting of the input array.
- Author
- Guillaume Favelier guill.nosp@m.aume.nosp@m..fave.nosp@m.lier.nosp@m.@lip6.nosp@m..fr
-
Florian Wetzels f_wet.nosp@m.zels.nosp@m.13@cs.nosp@m..uni.nosp@m.-kl.d.nosp@m.e
- Date
- June 2020
VTK code for computing a new scalar array from a specifiable point or cell data array. For each cell or a point the new (integer) value is its index in a sorting of the input array. The name of the new array is "PointScalarFieldName" or "CellScalarFieldName".
- Parameters
-
Input | Input scalar field (vtkDataSet) |
Output | Output scalar field (vtkDataSet) |
This filter can be used as any other VTK filter (for instance, by using the sequence of calls SetInputData(), Update(), GetOutput()).
The input data array needs to be specified via the standard VTK call vtkAlgorithm::SetInputArrayToProcess() with the following parameters:
- Parameters
-
idx | 0 (FIXED: the first array the algorithm requires) |
port | 0 (FIXED: first port) |
connection | 0 (FIXED: first connection) |
fieldAssociation | 0 OR 1 (DYNAMIC: point or cell data) |
arrayName | (DYNAMIC: string identifier of the input array) |
- See also
- ttk::IdentifyByScalarField
Definition at line 38 of file ttkIdentifyByScalarField.h.